Skip to main content

Multiline Command

Multiline (Command)

Command: ML MLINE

Specify start point: This will start a new multiline.

Specify next point:  It will draw multiline at specified location and will keep prompting for next point.

Undo: this option deletes the last segment drawn.

Close: This will close the vertex of polylines start point and end point.

Justification: Justification will give you three options.
  • Top
  • Zero
  • Bottom
Top: This will create multiline by taking top line as base reference.

Zero: This will create multiline by taking mid of multilines as base reference.

Bottom: This will create multiline by taking bottom most lines as base reference.

Scale: Controls the overall width of the multiline. This scale does not affect linetype scale.

The scale factor is based on the width established in the multiline

style definition. A scale factor of 2 produces a multiline twice as 

wide as the style definition. A negative scale factor flips the order of

the offset line—the smallest on top when the multiline is drawn from

left to right. A negative scale value also alters the scale by the

absolute value. A scale factor of 0 collapses the multiline into a

single line.


Style: Specifies a style to use for the multiline.

Style name: Specifies the name of a style that has already been

loaded or that has been defined in a multiline library (MLN) file that

you have created.


?-Lists the loaded multiline styles.


Comments

Post a Comment

Popular posts from this blog

How to draw objects faster with perfect precision in AutoCAD | Object snap| polar tracking | Tracking method | Direct distance entry

 Hello Friends, This blog covers topic basesd on object snap tracking, polar tracking, direct distance entry, tracking method for drafting drawing without any any errors at faster speed.  OBJECT SNAP TRACKING: Object snap tracking (F11) works when object snap option (F3) is kept on. object snap tracks various points of object such as end point, mid point, intersection of two objects etc. they are also used to draw parallel lines and perpendicular lines with to respect to a given object.  You can get object snap and object snap tracking option under drafting settings for which you can press "DS" in command box. below diagram shows all the snap points which Autotrack uses. While tracking any objects a "+" sign is displayed on tracking point with a green extension line with a "x" mark. POLAR TRACKING: In autoCAD ortho mode makes it possible to track in vertical or horizontal direction with increment angle as 0, 90, 180, 270. how ever we can set out increme...
Post a Comment
Read more

Co-ordinate systems

Hello Friends,             This is my first blog on AutoCAD tutorials. I won’t waste time on overview of AutoCAD and its uses which everyone knows. I will start directly with Co-ordinate systems of AutoCAD.             Co-ordinates systems are not of more use left in recent versions but still knowledge of co-ordinate systems is important as this keeps your mind sharp.  ABOUT CO-ORDINATE SYSTEM:     If you want to make any object in autocad you have two options.  1. you can directly click at any know point or  2. you can specify co ordinates of the point in command box. CARTESIAN AND POLAR CO-ORDINATE SYSTEM: Cartesian co ordinate system works only on linear distance. it have 3 axis X,Y,Z. when u specify any point with (+ or -) sign it prompts autocad to move along positive axis or negative axis at a specified distance. while working in 2D drafting, ...
1 comment
Read more

How to Draw lines.

Command: L (Enter) Syntax for line command goes as follows with various co-ordinate system. if you have not seen previous video the pls click on below link. 1.  Absolute co-ordinate system. 2. Relative rectangular co-ordinate system. 3. Relative Polar co-ordinate system.                                                    ABS│ R.R  │ P.R Specify first point:                      5,5 │ Click│Click                                                       ABS│ R.R  │ P.R Sp...
Post a Comment
Read more