Command for to 2D curved geometric objects

From command

From: fro (enter) From command is used to draw a line or any objects base point at a specific distance from a particular reference point. (Video link attached at the end of commands) Command: L LINE Specify first point: fro Base point: Click at corner A <Offset>: 5 Specify next point or [Undo]: fro Base point: Click at corner B <Offset>: 50 Specify next point or [Undo]: ESC click here to see how to use from command. Related Concepts: About Polyline. About lines. About multilines. Relates Task: How to draw lines. How to draw polylines. How to draw multiline. How to edit multiline. How to create multiline style. Related reference: Commands for linear geometric objects. Mid point command. Co-ordinate entry system. Direct distance entry. How to draw lines with precision.

How to draw objects faster with perfect precision in AutoCAD | Object snap| polar tracking | Tracking method | Direct distance entry

Hello Friends, This blog covers topic basesd on object snap tracking, polar tracking, direct distance entry, tracking method for drafting drawing without any any errors at faster speed. OBJECT SNAP TRACKING: Object snap tracking (F11) works when object snap option (F3) is kept on. object snap tracks various points of object such as end point, mid point, intersection of two objects etc. they are also used to draw parallel lines and perpendicular lines with to respect to a given object. You can get object snap and object snap tracking option under drafting settings for which you can press "DS" in command box. below diagram shows all the snap points which Autotrack uses. While tracking any objects a "+" sign is displayed on tracking point with a green extension line with a "x" mark. POLAR TRACKING: In autoCAD ortho mode makes it possible to track in vertical or horizontal direction with increment angle as 0, 90, 180, 270. how ever we can set out increme...

How to use direct distance entry system

DIRECT DISTANCE ENTRY (Command modifier) This will locate the next point at a specified distance along the direction of your cursor. When it prompts for "specify next point" , enter a numeric value. With direct distance entry system you can specify the next point relative to previous point your previous point on which you were working. At any prompt for specifying other point, move your cursor to specify the direction and then enter a numeric value to create or move any object. In the following example, the second point for the line will be located 5 units toward the direction of the cursor. The direct distance that you enter is measured along the path from the last point to the current location of the cursor. This feature is usually used with Ortho or Snap mode turned on. E...

Autocad tutorials

Search This Blog